Finishing the Twin Turbo Project at Mesa
 

Ok the engines for the Chris Cat were rigging and repowering are nearing completion Dec 31 is our deadline and the heads are being finished today with the new custom superlight weight hollow titanium valves we were waiting on these are 10% lighter than anything before and we need it for the 8900 rpm we need to turn them to make the power. Here a couple of pics of the cylinder heads in the Serdi and the seats.Sincerely Laz

Re: Finishing the Twin Turbo Project at Mesa
 

niiiice, any other info about the power for it? displacement? internals etc. 8900 rpms.... :cool: that gona be one badazz chris craft

Re: Finishing the Twin Turbo Project at Mesa
 

what size are the motors? what bore and stroke? what hp are you looking for? efi or carb? what do you need to rev em that high?

Re: Finishing the Twin Turbo Project at Mesa
 

The engines are small ci and were looking for 1300hp so we have the drives geared for the rpm

Re: Finishing the Twin Turbo Project at Mesa
 

laz are they bb or sb? what stroke are you reving that high?

Re: Finishing the Twin Turbo Project at Mesa
 

I think he told us small blocks
:cool:

Re: Finishing the Twin Turbo Project at Mesa
 

Laz I dont see any guide boss work on the intake? What boost you plan on making???


Rob :D

Re: Finishing the Twin Turbo Project at Mesa
 

8900!?!?! Man! Bring ear plugs on that ride. I'd love o hear that thing doing a low level flyby.

Re: Finishing the Twin Turbo Project at Mesa
 

Rick Bolens has his BB turbo mills running in his Talon "Gone Again". That thing is hush-quiet but runs real fast. I think they're up in the 140+ range.

Re: Finishing the Twin Turbo Project at Mesa
 

strip he said small ci not small blocks, i was wondering if hes running 3 3/4 stroke like a 396/402 crank.