Re: Question Bout Spark plugs
 

I spent 3 yr training for GM then 3.5 with bosch now I am here training for Volvo. I still have contacts with bosch If you need any analysis on thoses plug let me know. Here in IL is where bosch does all the product application for there spark plugs.
Mike

Re: Question Bout Spark plugs
 

Thanks Mike

Ill keep you up to date. Once we get the motor apart. I may take you up on that offer.

Re: Question Bout Spark plugs
 

Bruce, Can we get a closer pic of plug electrode?

Re: Question Bout Spark plugs
 

its hard to get that close up without being out of focus. but I'll try

Re: Question Bout Spark plugs
 

Not good. Yank the motor out. Probably nees a set of slugs and a bore.

Re: Question Bout Spark plugs
 

I would suggest doing a leak down test on the engine before pulling it all the way apart. Even cold it will at least give you an idea if the rings are hurt. Sounds like rings though. May have nipped a piston.

Dean Gellner
Gellner Engineering Marine Power

Re: Question Bout Spark plugs
 

Hard to tell but in the pic's there look like there is some Aluminum on the center electrode

Re: Question Bout Spark plugs
 

Did that happen in Camden?

Re: Question Bout Spark plugs
 

yes

Re: Question Bout Spark plugs
 

had to bring this back to the top.....

just an update since last post. detonated piston. aluminum fragments all over the place. needed machining, pistons, rebuild etc etc.......

all because wrong plugs were put in. mechanic aknowledged the error and said he would reimburse me for the rebuild. Obviously, he will not be doing it.

as long as he makes good on the rebuild, I will not mention his name, publically.

motor is just about done.