Top gun pair of 555 From Mesa
 

Here are a pair of 555 low comp poker run engines for a friends Top gun in Miami these were Bow tie blocks and were installing Crower cranks with Carrillo rods and custom JE pistons the heads are aluminum bowties we did some porting work to and the intakes were Wilsons with 1050 holleys and Thunderbolt Ignition Here is a pic of a finished one and the second being finished this week 740 hp @ 5800rpm.Sincerely Laz

Re: Top gun pair of 555 From Mesa
 

nice Laz, what cam specs and compression?

Re: Top gun pair of 555 From Mesa
 

9.5:1 AND THE CAM IS A CUSTOM 238 DEGREES @.050 ON THE INTAKE 242 DEG ON THE EXHAUST WITH A 112 LOBE SEP AND THE CAM INSTALLED AT 110 INTAKE CENTERLINE

Re: Top gun pair of 555 From Mesa
 

Is that a hyd roller? What ign to run 5800 on thoose? They are std decks right? Thanks, chris

Re: Top gun pair of 555 From Mesa
 

Standard deck and yes Hydraulic rollers

Re: Top gun pair of 555 From Mesa
 

With that kind of power I am thinking twice about the need to go to a tall deck. Nice work.

Re: Top gun pair of 555 From Mesa
 

Laz finds the horses!

Re: Top gun pair of 555 From Mesa
 

In my opinion I'll build a short deck any day to make between 500 and 750 hp I will only build a tall deck when it can't be done in a short deck. Sincerely Laz

Re: Top gun pair of 555 From Mesa
 

Nice combo Laz with a great bottom end; perfect foundation for a centrifugal blower engine. Are you displaying at the Miami show?

Re: Top gun pair of 555 From Mesa
 

Were going to be at the show Tom but I'm not going to have the Procharger stuff ready unfortunately