Need a bezel for Kiekiefer (sp?)
 

Looking for a trim bezel for a 4 lever setup. I've talked to all te normal go-to's and they don't have. Who does?

Re: Need a bezel for Kiekiefer (sp?)
 

mercury marine

Re: Need a bezel for Kiekiefer (sp?)
 

What is the base measuremant you have?

Re: Need a bezel for Kiekiefer (sp?)
 

It is bigger than the Livorsi shifters. I ordered one from Eddie Marine, it was too small. I need to clarify what I am looking for. I want a trim ring for around the base of the shifters/throttles.

Re: Need a bezel for Kiekiefer (sp?)
 

The Livorsi throttles are exactly like the EMI, the only difference is the name on them. They are both made by the same company in Canada so the Livorsi bezel isn't going to help you either. Try the bezel for the Gaffrig shifters. They are shaped more like the Zero effort Merc throttles.

Here's a link to Tp, he sells the Gaffrig stuff and I sure he can get you the bezel for thier shifters.

http://www.tpmarine.com/index.asp?Pa...ROD&ProdID=723

Re: Need a bezel for Kiekiefer (sp?)
 

is the part you are looking for listed in this diagram?

http://www.mercruiserparts.com/Show_...+%284+Lever%29

Re: Need a bezel for Kiekiefer (sp?)
 

No a factorty piece. I want a billet piece that surrounds the shifters/throttles. Like these but in a 4 stick setup.

Re: Need a bezel for Kiekiefer (sp?)
 

So, I need to build my own???? I can't believe nobody knows.

Re: Need a bezel for Kiekiefer (sp?)
 

Yes, I know what you are wanting, but was curous how much larger from the Gaffrig/Livorsi,EMI's.

Not much to it if you need to make one then have it P/C'ed

Re: Need a bezel for Kiekiefer (sp?)
 

It is about an inch larger overall. I'm making one tomorrow. Well, I'm paying a guy to make one tomorrow. Let's not get a rumor started that I work.