|
source for highly flexible exhaust hose?
I installed my dana marine exhaust into my Donzi. The tips are about 1.5" narrower than the risers and the 12" run of wire reinforced 4" exhaust hose is really at it's limit of stretch. I had to use 3 people and a 8 foot 2x4 to get enough leverage to get the riser twisted straight to sit down in the manifold! I'm dreading doing it again.
Does anyone have something more flexible? I was thinking high temp silicone or similar. |
Re: source for highly flexible exhaust hose?
Originally Posted by zimm17
I installed my dana marine exhaust into my Donzi. The tips are about 1.5" narrower than the risers and the 12" run of wire reinforced 4" exhaust hose is really at it's limit of stretch. I had to use 3 people and a 8 foot 2x4 to get enough leverage to get the riser twisted straight to sit down in the manifold! I'm dreading doing it again.
Does anyone have something more flexible? I was thinking high temp silicone similar. |
Re: source for highly flexible exhaust hose?
Be careful, my buddy's scarab had that problem and he burnt the hose out on the bend. He had to have some custom bends made out of stainless. :chimp:
|
| All times are GMT -5. The time now is 10:22 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.