Built 496 w/ Weiand 525sc blower...Need advice
01-12-2006, 09:03 AM
#11
Registered
Thread Starter
Join Date: Dec 2005
Location: Mission Viejo, CA
Posts: 390
Likes: 0
Received 0 Likes
on
0 Posts
Re: Built 496 w/ Weiand 525sc blower...Need advice
There's a guy with a 250 and 2 450 holleys on it. This set up seems real odd to me especially the side float carbs and that small cfm. Shouldn't one run center floats on these? 4150's?
01-12-2006, 10:11 AM
#13
Registered
Join Date: Jan 2001
Location: ST. Louis, MO, USA
Posts: 1,658
Likes: 0
Received 0 Likes
on
0 Posts
Re: Built 496 w/ Weiand 525sc blower...Need advice
Center ones were very rich, especially at idle (black plugs). Lots of loading up, rpm oscillations, even with MSD.
CMC around here sets their 502/250 blower motors with twin carbs, and they have a very nice idle.
Gary
CMC around here sets their 502/250 blower motors with twin carbs, and they have a very nice idle.
Gary
01-12-2006, 11:11 AM
#15
Registered
Join Date: Jan 2001
Location: ST. Louis, MO, USA
Posts: 1,658
Likes: 0
Received 0 Likes
on
0 Posts
Re: Built 496 w/ Weiand 525sc blower...Need advice
They were running Demons, 650s I think.
Try the holley wesite, they have a lot of good info, even on marine supercharger setups.
They have a tech line too. Never tried it, but it may help
Try the holley wesite, they have a lot of good info, even on marine supercharger setups.
They have a tech line too. Never tried it, but it may help
Thread
Thread Starter
Forum
Replies
Last Post
Outkast Rafe
General Boating Discussion
2
05-29-2007 01:01 PM
