Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   diagnostic computer 502 mag mpi (https://www.offshoreonly.com/forums/general-q/121516-diagnostic-computer-502-mag-mpi.html)

stevesxm 01-29-2006 01:02 PM

diagnostic computer 502 mag mpi
 
am told there is a diagnostic computer that plugs directly into the harness of 502 mag mpi that will generate history and identify sensor issues if any... anybody have a part number for this or have one to sell ? i have the later ones..

e mail me direct if you have one to sell. [email protected]

US1 Fountain 01-29-2006 01:29 PM

Re: diagnostic computer 502 mag mpi
 
http://216.230.203.183/marine/mtspec.htm

I think they run around $400 new. I too wouldl like to find a good complete used one.

outdrive man 01-29-2006 10:32 PM

Re: diagnostic computer 502 mag mpi
 
dont buy the techmate if you need a diagnostic tool buy the diacom system from rinda. it will load right on you laptop or desktop.

Dave M 01-31-2006 07:08 AM

Re: diagnostic computer 502 mag mpi
 

Originally Posted by outdrive man
dont buy the techmate if you need a diagnostic tool buy the diacom system from rinda. it will load right on you laptop or desktop.

I'll second that! The Diacom software is awesome. Trouble codes are just one of many capabilities that Diacom has.


http://216.230.203.183/marine/marine.htm

US1 Fountain 02-02-2006 07:27 PM

Re: diagnostic computer 502 mag mpi
 
Do you still use the scan tool to use the Diacom software?

kr1276 02-02-2006 07:47 PM

Re: diagnostic computer 502 mag mpi
 
I have the Tech 1 which is also used to diagnose the older (90's ) GM vehicles. It gives lots of good information. I also have the Rinda unit which I use on my 496's. I would not purchase a boat without hooking one of these up. If you need one let me know as I would be interested in selling the Tech 1.

Keith

Dave M 02-02-2006 08:00 PM

Re: diagnostic computer 502 mag mpi
 

Originally Posted by US1 Fountain
Do you still use the scan tool to use the Diacom software?

No, you load the software on a laptop and connect to the ECM via a USB cable. You can record live data. I connect to my motor then go out and run for however long I want and it records the whole time. You can then display the data in text or graph format. You can tell what is going on with your motor anywhere from idle to WOT under load in real life conditions. I have a 496HO. I'm not sure if the older ECMs will display as much info as the PCM555. You might want to ask Rinda about that.

US1 Fountain 02-02-2006 08:06 PM

Re: diagnostic computer 502 mag mpi
 
What's the difference between the Tech1 and the Merc scanner?

Thanks Dave.

Looks like I need to find someone with a copy.

Dave M 02-02-2006 08:35 PM

Re: diagnostic computer 502 mag mpi
 
Rinda is not that dumb, the SW is useless without the cable that comes with it. It has some type of HW lock built into it.

US1 Fountain 02-02-2006 08:55 PM

Re: diagnostic computer 502 mag mpi
 
Yes, I assumed it had some sort of softkey to operate. Built into the cable in this case. I was implying a copy and cable for sale, but at used pricing.

It looks like the program is not that much more $ than the scan tool.
The demo on their site looks like the ticket!

Thanks for the heads up.


All times are GMT -5. The time now is 05:41 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.