Ingenious Marine software
 

http://www.azspeed-marine.com/inmaso.html
Anyone have it?

Re: Ingenious Marine software
 

looks cool :cool: anyone got this????

Re: Ingenious Marine software
 

I have this....

http://216.230.203.183/acro/DiacomMarine.pdf

It is awesome, it looks similar to what you are looking at. It doesn't allow for tuning and calibration though.

Re: Ingenious Marine software
 

I want it for tuning & calibration. I guess it works on more than one ECM, hints I could hook up my friends!

Re: Ingenious Marine software
 

We have and use Jim's Ingenious software. It works very well, is very user friendly and fairly simple to use. Jim has updates coming to make it even easier to tune. We do a lot of work on the dyno and our new 725HP 600 inch N/A 496 Raylar motor is equipped with the MEFI4b tuned with Jim's software.

Ray @ Raylar

Re: Ingenious Marine software
 

725HP 600 inch N/A 496 you are confusing me? :D 496 based block made to 600 ci. What kind of piston wear are you getting or have you had enough run time. Long pulls not little 30 seconds blasts they do not count. :eek:

You have some great stuff I just wish I has some money to play with. :rolleyes:

Re: Ingenious Marine software
 

I spoke at length with ASM. The software they created is based on Merc software, however it works only with the ASM ECU, which is MEFI 4. An adapter for the MEFI 3 to MEFI 4 conversion is available. The different packages offered allow a user to use the software on an ECU previous mapped by ASM or purchase a new ECU and the software together. It is actually a pretty good price if you compare it to Holley and others with programmable software out there.

The only issue is that is this worth it for a one time mapping of an ECU. Once they're set, they don't require tweaking, so a couple thousand dollars may be wasted compared to having your ECU mapped on a dyno for $ 300.00 - 500.00 + dyno cost.

Re: Ingenious Marine software
 

that i find HARD to believe......

Re: Ingenious Marine software
 

Didn't you guys claim you could use the merc ecu without needing to change any mapping, or maybe you still do.

Re: Ingenious Marine software
 

If ASM only letts you do one ECU, what a waste. I'll look at the software from the mfg that Ray was talking about.

Re: Ingenious Marine software
 

I have used it and it is the equivlent of the latest FAST and DFI systems. It is very user friendly. This will save you money in the long run because you could take this controller and run a different cam, or change to a supercharger or put it in a new boat and just recalibrate it, and, if there is any driveability issues, you don't have to take it out and re-dyno plus you can change it on the fly weather on the boat or on the dyno. It is real time programming, you dont have to shut down the motor to make a calibration change.

Re: Ingenious Marine software
 

You can get the new Commander 950 with WB02 for substantially less than that. The FAST system with WB02 is a bit more than that but would certainly be my choice.
With these you can tune and adjust A/F and such where it counts which is on the water :rolleyes:
Dave

Re: Ingenious Marine software
 

So the FAST system will work on the Merc ECM?

Re: Ingenious Marine software
 

The FAST system will replace the Merc ECM.
You can sell the Merc ECM :drink: