Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   A little advice (https://www.offshoreonly.com/forums/general-q/122758-little-advice.html)

jamieslib 02-16-2006 08:18 PM

A little advice
 
hey guys/gals i've been arround boats my whole life. just bought a '89 four winns liberator 211. (for next to nothing) just built a 400 hp smallblock for it. what kind of speed should i expect, and is this a decent project boat???

nordic95 02-16-2006 08:20 PM

Re: A little advice
 
Any project that cost you next to nothing is a great project start.Now you just have to figure on how to put next to nothing into it and you are set.

nordic95 02-16-2006 08:20 PM

Re: A little advice
 
O did you want good advice.I have non ,sorry

Good luck

GOODT 02-16-2006 08:36 PM

Re: A little advice
 

Originally Posted by nordic95
O did you want good advice.I have non ,sorry

Good luck


LMAO..... :drink:

jmherbert 02-16-2006 09:20 PM

Re: A little advice
 
Welcome to the club. Both the OSO site, the "bought a Lib for cheap," (mines a '87 241) and the just built a 400HP SBC for it. Motor ingested water and dropped a valve seat. Interior is like showroom.

Mine has an Alpha drive on it, with the old "stock" (?) 350 Mag (Carb) it did 42. My local boat expert told me to expect 53-56mph.

I hope you have an alpha or bravo, if you have an alpha, I'd put a drive shower on it.

David Stotz 02-17-2006 05:26 AM

Re: A little advice
 
Welcome ! I have an 86 211 Liberator. SBC about 375 - 400 HP. The top speed that I see is about 57 MPH GPS. But I really haven't spent any time dialing the boat in, Trying various props etc. With the original 260 Mercruiser and Alpha drive the boat would run 50. By the way don't believe all the stories you are going to hear about the Alpha drive if your boat has one. Again, mine is 20 yrs. old and is in excellent condition according to my mechanic. It was just gone through for the first time and he said all the internals look good. The only thing was it needed to be resealed. I use synthetic drive lube and a shower!
Good luck with your boat, Dave

fund razor 02-17-2006 01:09 PM

Re: A little advice
 

Originally Posted by jamieslib
hey guys/gals i've been arround boats my whole life. just bought a '89 four winns liberator 211. (for next to nothing) just built a 400 hp smallblock for it. what kind of speed should i expect, and is this a decent project boat???

What kind of drive?

Is it a decent project boat in what respect?

How are the transom and stringers?

fund razor 02-17-2006 01:11 PM

Re: A little advice
 

Originally Posted by David Stotz
By the way don't believe all the stories you are going to hear about the Alpha drive if your boat has one.

Don't believe the stories about Cobras either.

Bravo stories you can believe. :D

jamieslib 02-17-2006 07:50 PM

Re: A little advice
 
it has a king cobra drive in the process of being rebuilt. everything else is solid..... the boat has about 275 hrs on it.

jmherbert 02-18-2006 12:23 AM

Re: A little advice
 
From what I am told, all libs had OMC cobras/king cobras. Somewhere along the line mine inherited an alpha. I have seen kings come with 460 Fords


All times are GMT -5. The time now is 07:35 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.