|
Re: Pressue relief valves?
Jerry, how did you do?
With them just as is Im running at 12psi with bumps to 15psi....the water was 2-4's... so a smooth water run/test is still set for Wed. |
Re: Pressue relief valves?
Mine were right at 20 psi max with the new springs, uncut. 1 motor will run a bit higher pressure until the valve is fully open, then it matches the other motor. I think my t-stat may be part of that condition. I cut 1 coil off 1 of the springs, but never ran it yet, just to see what happens. 1of the dump hose has a fast pulsating to it. The other is smooth, perfect.
All in all, I'm good to go with them uncut. What a huge relief this is. No more 50psi pressure. Down side is, I ran thru alot of gas Sat, now that I can run. :D |
Re: Pressue relief valves?
Originally Posted by US1 Fountain
What a huge relief this is. No more 50psi pressure. Down side is, I ran thru alot of gas Sat, now that I can run. :D
|
To the top for Easyrider
|
| All times are GMT -5. The time now is 08:14 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.