Offshoreonly.com - Correct head gaskets for Edelbrock Heads?

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Correct head gaskets for Edelbrock Heads? (https://www.offshoreonly.com/forums/general-q/125640-correct-head-gaskets-edelbrock-heads.html)

1BIGJIM

03-23-2006 03:11 PM

Correct head gaskets for Edelbrock Heads?

I have a Mark IV bored .060. = 4.310 if my math is correct.
It has the three coolant holes in the lower part of the block.
Is the Felpro 1037 gasket the correct one?
This gasket has a cylinder size of 4.370.

blue thunder

03-23-2006 05:36 PM

Re: Correct head gaskets for Edelbrock Heads?

With fel pro and edelbrock al 6055 heads I use number 1027. Of late it is cometic MLS.

BT :cool:

All times are GMT -5. The time now is 05:47 PM.