Mercruiser low water "muffs"
 

I'm looking for the outdrive "muffs" :D for a Mercruiser bravo 1 with low water pickup. Looks like a cone with a bungie so you can run the engine out of water. Anybody have one available or have a link where I can buy one? :drink:

Re: Mercruiser low water "muffs"
 

Here is the part number for the one from mercury 843122T01. Ed

Re: Mercruiser low water "muffs"
 

There are a couple different ones, go to

http://mercruiserparts.stemtostern.c...ools/tool2.pdf

then scroll down to page 18 there are pictures of the Mercury flush tools.

Hope this helps.
Caleb

Re: Mercruiser low water "muffs"
 

bought one from eddie marine last summer for about $35. Thing was back ordered for about 3 months

Re: Mercruiser low water "muffs"
 

I have a LWP too. For about $5 from ACE hardware, I put together an adapter that adapts from a garden hose directly into the input of the raw water pump. It works well if it doesn't bug you to have to remove the input hose to the raw water pump every time and attach the adapter.

Re: Mercruiser low water "muffs"
 

Thanks guys!

Re: Mercruiser low water "muffs"
 

Bobs Machine sells them also

Re: Mercruiser low water "muffs"
 

who is bobs machine? Do you have a number?

Re: Mercruiser low water "muffs"
 

I use regular muffs and a couple pieces of tape on the low water opening. Works fine.

Re: Mercruiser low water "muffs"
 

My Bravo I only has the low water pickup, it does not have the side pickups. But thanks for all the replies, Wrinkleface hooked me up with what I need for a fair price. :drink:

Re: Mercruiser low water "muffs"
 

Ahhh..makes sense. :D

Re: Mercruiser low water "muffs"
 

I have the same thing. Where did yiu get yours?

Re: Mercruiser low water "muffs"
 

I had a Bob's on an Alpha with LWP. I looked it up just the other day, and it was $24.95, today I looked and it's $29.95. Someone tried to tell me it won't work with a Bravo LWP, but I can't see why it wouldn't.

Bob's Machine Shop,
BMS International, Inc
4314 Raleigh Street
Tampa, FL 33619

Order line only: 1-800-966-3493

Tech line: (813) 247-7040
Fax: (813) 247-7041

Re: Mercruiser low water "muffs"
 

I called bobs and they said it would only work on there nose cones, not a regular xr. I heard teagues has them, but they are $60. sounds high to me.

Re: Mercruiser low water "muffs"
 

Bob's Machine Shop's flusher"will not" work on a Mercruiser drive. I designed and manufacture all of the hi-performance flushers for Mercury Racing, Yamaha, Eddie Marine, & Imco. You can buy the flusher from any of the above or you can buy it from me, the manufacture. I need to know which gearcase that you have. Marine Engineering, 1470 12th Street, Sarasota, FL 34236. Ph # (941) 955-5833.

Re: Mercruiser low water "muffs"
 

How much for two for xr drives shipped to 37803 ? Thanks ,Cliff

Re: Mercruiser low water "muffs"
 

This worked well for me.


http://www.offshoreonly.com/forums/s...d.php?t=132657

Re: Mercruiser low water "muffs"
 

Any other products or services we should know about Marine Manufacturing? Ed

Re: Mercruiser low water "muffs"
 

I have one of the mercury flushers for the low water pickup that I no longer need.

Thanks.