Need Bell Housing Pics
 

Does anyone have a B1 bell housing off they can take some pics of. I need to see how the Oil Resevoir is plumbed from the inside of the Bell housing, through the gimbal housing and into the boat. I added an HP bell housing to an 89 B1 setup last year and now I need to finish plubming it for the Oil resevoir, so I can bolt an XR on it.

Thanks

Re: Need Bell Housing Pics
 

My 93 B1 bell housing is currently sitting in my house and can take some pics.

Its a brass hose barb on the backside to the resevior hose which goes to another hose barb on the gimbal housing.

I will try to take pics tonight and post.

Re: Need Bell Housing Pics
 

Pics of parts 8, 1, 5, and 24 would be helpful. Especially part #1

Re: Need Bell Housing Pics
 

For now I can only give you a pic of #8. The boat is stored about an hour away from my house and would not get to the others until Sat.

Re: Need Bell Housing Pics
 

Advantage27 - Thanks - great pic. Looking forword to anymore you can get this weekend. Hey - worse case it's a good reason to check on the boat. I probably already know the answer to this, but does the motor have to come out to get to these fittings.