Re: trs drives blowing out props
 

Does anyone else have any ideas why my boat is blowing the props out of the water until it planes out thanks guys

Re: trs drives blowing out props
 

You might simply try a Mirage Plus instead of the Mirage. The plus has a lot more cup to it. Or try a Bravo 4 blade. If you are at 25" pitch now, then use a 24" 4 blade.

Re: trs drives blowing out props
 

Thanks payton

Re: trs drives blowing out props
 

I agree with Payton... :drink: :cool:

Re: trs drives blowing out props
 

Mine are 23 pitch now

Re: trs drives blowing out props
 

I would try a 23 Mirage+ and a 22 Bravo1. I also would ask this question in the prop section. There are a few prop tuners that watch that section.

Re: trs drives blowing out props
 

ill try that as well ...thanks payton

Re: trs drives blowing out props
 

Well i had the mirage props recupped and added a little more .....still doing the same thing .....not as bad ....i havent tried my cleavers 23p yet .....any other ideas ????/

Re: trs drives blowing out props
 

I have a pair of 21P cleavers for TRS--R & L rotation if they are of interest. Let me know if you're interested.

Re: trs drives blowing out props
 

Make sure your tabs are all the way up. On my formula, if I had the tabs down at all they would lift the stern just enough that the props blew out everytime.