Offshoreonly.com - Another Bravo Question(again)

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Another Bravo Question(again) (https://www.offshoreonly.com/forums/general-q/127306-another-bravo-question-again.html)

boatman22

07-09-2006 08:03 AM

Re: Another Bravo Question(again)

Quote:

Originally Posted by GOODT

at the mtr wont help has to be done at the shifter as stated

GOODT, how is this done at the shifter? Are there different cable locations? I have a Mercury shifter.

GOODT

07-09-2006 08:15 AM

Re: Another Bravo Question(again)

Quote:

Originally Posted by boatman22

GOODT, how is this done at the shifter? Are there different cable locations? I have a Mercury shifter.

YES, there are different hook ups on the shifter....

basically you move the cable to the opposite side of the shifter....

easy to do hard to explain and not knowing which shifter you have makes it harder if you have k keifer shifters very easy

boatman22

07-09-2006 11:47 AM

Re: Another Bravo Question(again)

Yes I have the K Keifers

GOODT

07-09-2006 11:52 AM

Re: Another Bravo Question(again)

just pull them up you will see they are hooked up on opposite sides just swap the way they are hooked up about 20 min max

All times are GMT -5. The time now is 11:11 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page