Offshoreonly.com
Page 3 of 3
1
2
3
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Drive Install Advice (https://www.offshoreonly.com/forums/general-q/127688-drive-install-advice.html)

nordic95 04-18-2006 08:56 AM
Re: Drive Install Advice
 
Originally Posted by cig1988
How old are the rubber bushings on the bellhousing?
They are the only part on the boat that is original,1991.After sleeping on US 1 response I think I may need to raise the front of the motors and redrill the mounts to make it work a little better.After the drive went in I did have to put some weight of mine on the front of the motor to get the bolts started.I think that may be my problem.

Nordic95


All times are GMT -5. The time now is 02:01 PM.
Page 3 of 3
1
2
3
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.