Offshoreonly.com - timing on hp 500

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - timing on hp 500 (https://www.offshoreonly.com/forums/general-q/127814-timing-hp-500-a.html)

rssteiny

04-18-2006 06:35 AM

timing on hp 500

what is the total timing and at what rpm on 2000 hp 500 carbs motors. and is there anything you need to disconect.

thanks

CIG3	04-18-2006 07:19 AM

Re: timing on hp 500

it should be 34 degrees. Not sure what to dis-connect if anything.

rssteiny

04-18-2006 05:02 PM

Re: timing on hp 500

34 at what rpm i assume 3000 and do i need to un hook any thing like a wire or somthing.

RLW	04-18-2006 10:01 PM

Re: timing on hp 500

Buy a set of genuine Mercury shop manuals. It will be the best $60.00 you ever spent. Anyway, I had a T-Bolt V ignition on a boat and had to jumper out a couple of terminals, when setting the timing.
I am not sure of a T-Bolt IV.

All times are GMT -5. The time now is 04:00 AM.