Offshoreonly.com - Dart angle plug head question SBC

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Dart angle plug head question SBC (https://www.offshoreonly.com/forums/general-q/128410-dart-angle-plug-head-question-sbc.html)

Full Force

04-24-2006 09:39 PM

Dart angle plug head question SBC

I can get a set of angle plug dart heads,for a small block,will they fit with the exhaust on my boat? I have the stock center rise manifolds.

Vinny P

04-25-2006 06:34 AM

Re: Dart angle plug head question SBC

They will clear the manifolds without any problems. If you look at the heads, the plugs are angled in toward eachother. That actually helps clear them from the manifolds.

resurrected

04-25-2006 07:33 AM

Re: Dart angle plug head question SBC

I was going to use GM's ZZ4 heads which are angled, and the plug boot was just clear of the manifold. This was with Stainless Marine Manifolds. Do a mock up on the bench before committing to anything!

Full Force

04-25-2006 03:27 PM

Re: Dart angle plug head question SBC

I am going to buy the since they are a local deal,after talking to him to see how the angle is I am sure they will be fine.
Thanks,Tim

All times are GMT -5. The time now is 03:57 AM.