Offshoreonly.com - My Bravo One.... Is this bad?

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - My Bravo One.... Is this bad? (https://www.offshoreonly.com/forums/general-q/128660-my-bravo-one-bad.html)

Shah Mat

04-27-2006 02:47 PM

My Bravo One.... Is this bad?

2 Attachment(s)

This is only on the starbord side. There appears to be a guide shim missing. The other side is fine and has the shim. It has .038" play side to side and has very minimal play diagionally. Of course I have the drive off already and it's hard to rock it right now. What do you think?

GOODT

04-27-2006 04:38 PM

Re: My Bravo One.... Is this bad?

I have seen worse clean it up put new pad on and check for exsseive play in bell housing, you should be ok

Zanie

04-28-2006 11:12 AM

Re: My Bravo One.... Is this bad?

The merc part number for the wear pad is 805261A 1.
List is $12.40

sleeper_dave

03-29-2007 07:17 AM

I'm having the same exact problem. Wear does this wear pad go? I didn't see any evidence of a wear pad on my drive.

Griff

03-29-2007 01:07 PM

Quote:

Originally Posted by sleeper_dave (Post 2074610)

I'm having the same exact problem. Wear does this wear pad go? I didn't see any evidence of a wear pad on my drive.

In the bottom pic, you can see a little notch at the right edge of the scuff. It clips on there and there is another little hole to the left of that. It just snaps into place.

All times are GMT -5. The time now is 04:19 PM.