502 mpi parts
 

I have a large amount of "stuff" from my 2001 35' Fountain Classic's 502 mpi's. Since I changed my motors to 540's with carbs, I am not using many of the original parts. Where would be a good place to sell and how do I determine a price? Thanks.

Re: 502 mpi parts
 

I am looking into putting a 502 in my boat since my 7.4L $hit the bed.

Lemme know what you have and I may be interested in a lot of it...

Re: 502 mpi parts
 

Ebay's the place .... besides here ...

Re: 502 mpi parts
 

Did you reuse the accessories? If not i need the whole set up - accessories, brackets, hoses, coolers , etc...

Re: 502 mpi parts
 

Ok, here we go. I don't have prices on these yet. But here is a list of parts that are sitting at the engine builders shop. Let me know if you are interested.

2 - Chev. stock cranks
2 - MPI 502 intakes, extruded
2 - Polished Intake Plenums
2 - Roller Cam Shafts
2 - Sets of roller lifters
2 - sets of pistons
2 - sets of rods
2- wire harnesses
2 - sets ECM's
2 - complete oil systems
2 - dampers
2 - timing covers (gen 6)
2 - fuel systems
2 - K&N air filters (ran only 2 seasons from ASM)
2 - distributors
2 - sets of plug wires
2 - circulating pumps and hoses
4 - CMI 4" bravo tail pipes
4 - through hull 4" exhaust tips and trim rings
2 - merc. cruiser bravo I drive reservoirs
2 - adjustable fuel regulators
4 - stock polished valve covers

These are from a 2001 35' Classic w/ 80 hours, original owner.

Re: 502 mpi parts
 

I sent you an email with my request.