Bravo Transom assembly ...
 

I have the steering assmebly out and noticed the steering arms have some play ....side to side . ..maybe 1/4" each way ....total 1/2" ? I searched and found a post said to tighten the pinch bolt and nut ..... and maybe some up and down motion ?.... I gota stop takin stuff apart ... :rolleyes:

Re: Bravo Transom assembly ...
 

sometimes that will work just keep in mind that if you torque it to much you can break the gimble ring !!!!!!!!!


here is a link to repair it the correct way short of replacing

http://www.jrmarine.com/products/gimbal_repair.htm

Re: Bravo Transom assembly ...
 

thanks Joe ....