Offshoreonly.com - oil cooler

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - oil cooler (https://www.offshoreonly.com/forums/general-q/129541-oil-cooler.html)

riski bidness

05-08-2006 09:26 AM

oil cooler

need to replace the rubber gaskets on the end plates . the oil cooler is on a 502 mercruiser.looked on bam marine web site no luck.anybody have a part # for the gaskets.

fbh-velocity

05-08-2006 10:13 AM

Re: oil cooler

Quote:

Originally Posted by riski bidness

need to replace the rubber gaskets on the end plates . the oil cooler is on a 502 mercruiser.looked on bam marine web site no luck.anybody have a part # for the gaskets.

I try look it up by mercruiser but dosen´t seems to be a spare part. As far as I remember it is only a rubber gasket that would be very easy to make by your own.

RLW	05-08-2006 06:33 PM

Re: oil cooler

I would cut a new gasket out of bulk material.

Advantage 27

05-08-2006 08:53 PM

Re: oil cooler

Try 27-816768

I searched forever and found this on stem to stern site. Can't actually remember where.

All times are GMT -5. The time now is 11:49 PM.