what oil cooler for trs?
What oil cooler are you guys running for your transmissions on your trs setup?
thanks |
Re: what oil cooler for trs?
A six inch cooler is a good size. Make sure the in and out are 1"1/4 for water and 3/8" pipe for the fluid.
|
Re: what oil cooler for trs?
Assuming a TRS with B/W tranny, CIG3 it correct. However, most of those came with a bellhousing that had either one or two integral coolers. If it is a TRS using a MerCtrans II, then the cooler is already in the tranny sump. Just be sure those cooler lines have not been capped off because someone installed a later seawater pump that didn't have the port tapped in for that cooler line. --- Jer
|
Re: what oil cooler for trs?
Originally Posted by jpclear
Assuming a TRS with B/W tranny, CIG3 it correct. However, most of those came with a bellhousing that had either one or two integral coolers. If it is a TRS using a MerCtrans II, then the cooler is already in the tranny sump. Just be sure those cooler lines have not been capped off because someone installed a later seawater pump that didn't have the port tapped in for that cooler line. --- Jer
What he said...... |
All times are GMT -5. The time now is 12:13 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.