Offshoreonly.com
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Cutting 4" Exhaust hose (https://www.offshoreonly.com/forums/general-q/130350-cutting-4-exhaust-hose.html)

David Stotz 05-18-2006 06:04 AM
Re: Cutting 4" Exhaust hose
 
Thank you for all the replies. There is no wire in the hose I purchased and I found a piece of pipe that fits inside so I'm going to try that method with a good sharp razor knife.

Steel Outlawed 05-18-2006 06:09 AM
Re: Cutting 4" Exhaust hose
 
A cut off wheel on a grinder or cut off tool works great also. Mark it with tape and follow the line.


All times are GMT -5. The time now is 07:48 PM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.