Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   1996 540 Bulldog timing question. (https://www.offshoreonly.com/forums/general-q/130362-1996-540-bulldog-timing-question.html)

bsc 05-17-2006 09:31 AM

1996 540 Bulldog timing question.
 
Stock 540 bulldog running at 4000ft elv.
The timing tab has no number markings, only a single white mark that is located two peaks in from the right side edge >>>>>x>>. Is that 0, 8 or 12 degrees?

After reading the forms the popular total advance is 33 to 34 degrees, sounds good?

Thanks for any help.
Bryan

ratman 05-17-2006 12:00 PM

Re: 1996 540 Bulldog timing question.
 
zero or tdc is always the biggest longest hash mark on every big and sbc ive ever set the timing on. you will need a timing light with adjustable advance

bsc 05-17-2006 12:43 PM

Re: 1996 540 Bulldog timing question.
 
All the hash marks on the timing plate are all the exact same size. I do have an adjustable timing light.
I’ll go stand on my head tonight and see if I can see any other imprinted marks besides the white dot, hope to see something.
Anybody else have any info would be great.

Griff 05-17-2006 02:09 PM

Re: 1996 540 Bulldog timing question.
 
The deepest indention is 0*. Each peak/point thereafter is an aditional 4*.


All times are GMT -5. The time now is 09:26 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.