Offshoreonly.com - Lifting motor ...

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Lifting motor ... (https://www.offshoreonly.com/forums/general-q/130385-lifting-motor.html)

offthefront

05-17-2006 01:30 PM

Lifting motor ...

ok .. I have the heads off a 502 and its on stand on the floor .....I want to pick it up so I can put it on an engine stand ... with the intake off and heads off I dont see any logical place to lift .... can put maybe 4 eyebolts (2 each side) in the head bolt holes so I can lift it up about 8" so I can bolt it up to the motor stand ? Or am I asking for trouble ...m

jmherbert

05-17-2006 01:46 PM

Re: Lifting motor ...

Either that or wrap a chain around it.

Those bolt holes are plenty strong to do it.

GOODT

05-17-2006 02:52 PM

Re: Lifting motor ...

Quote:

Originally Posted by offthefront

can put maybe 4 eyebolts (2 each side) in the head bolt holes

that will work but 2 is plenty ( diaganly )

mopower

05-17-2006 03:51 PM

Re: Lifting motor ...

Chain , bolts , head bolt holes...get the picture. NO problems

offthefront

05-17-2006 05:33 PM

Re: Lifting motor ...

thanks men ..... I gota enough to do ...didnt need to be trying to tap out a block .... :rolleyes:

US1 Fountain

05-17-2006 08:01 PM

Re: Lifting motor ...

Couple of guys.... lift'r up and on. :p

All times are GMT -5. The time now is 10:26 PM.