|
Calling all engine builders
I need help with a cam. I just had my HP 500 bored out 30 over with J & E flat top pistons w/ one valve relief, I also bought merlin heads with 2.3 and 1.8 valves and 119cc chambers. i am also running a dart 2 intake and a holley 850, I already have bought aftermarket roller lifters, I just need the best off the shelf cam I can get to make the best power and stay away from reversion. The exhaust is stainless marine. The motor is in a 27 fever.
Any help would be greatly appriciated, My engine builder builds roundy round motors and doesnt want to take a chance |
Re: Calling all engine builders
Originally Posted by litlguyz
I need help with a cam. I just had my HP 500 bored out 30 over with J & E flat top pistons w/ one valve relief, I also bought merlin heads with 2.3 and 1.8 valves and 119cc chambers. i am also running a dart 2 intake and a holley 850, I already have bought aftermarket roller lifters, I just need the best off the shelf cam I can get to make the best power and stay away from reversion. The exhaust is stainless marine. The motor is in a 27 fever.
Any help would be greatly appriciated, My engine builder builds roundy round motors and doesnt want to take a chance |
Re: Calling all engine builders
I second the 651 makes nice power.
|
| All times are GMT -5. The time now is 10:41 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.