Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   blower motor exhaust (https://www.offshoreonly.com/forums/general-q/131179-blower-motor-exhaust.html)

flatlander 05-26-2006 11:08 PM

blower motor exhaust
 
i looking toward the future. i see a blower motor on a 27-29ft boat. what would be a good exhaust. i like to boat in wisconsin so i would need a good muffler also. does anyone have a good setup that is below 87db?
thanks in advance.

Ateco 05-27-2006 08:28 AM

Re: blower motor exhaust
 
Depending on the HP, we would recommend either Elbow Tops, Sport Tubes or Big Tubes. What CI and HP is the engine?

http://www.custommarine.com/headerap...erAppChart.php

We offerClamp on and Thru Hull styles and 4", 4-1/2" and 5" sizes of the CMI Sound Elimnation System Mufflers.

Let us know if we can help! Here's or current offering and thanks for the inquiry!!

http://www.offshoreonly.com/forums/s...d.php?t=131060

Ateco 05-27-2006 08:55 AM

Re: blower motor exhaust
 
Let us know if we can help. We provide service.
If we can help with your engine build let us know, we'd be happy to provide a proposal.

gg10 05-27-2006 11:10 AM

Re: blower motor exhaust
 
Try stainless marine gen III manifolds, for supercharged they work well, I have a good used set with 4.5" tailpipes, transom rings and mufflers 2000.00, gg10

Fountain38SC 05-27-2006 07:24 PM

Re: blower motor exhaust
 
I have CMi dry pipes. No complaints. They were wet but I had to go dry to stop reversion in my new motors. Make sure you buy sometheing that fits your future plans.

Ratickle 05-28-2006 07:53 AM

Re: blower motor exhaust
 

Originally Posted by Fountain38SC
I have CMi dry pipes. No complaints. They were wet but I had to go dry to stop reversion in my new motors. Make sure you buy sometheing that fits your future plans.

What muffler system do you use? Has it been inspected by the Water Police and passed and if so at what decibel?

flatlander 05-30-2006 09:11 AM

Re: blower motor exhaust
 

Originally Posted by gg10
Try stainless marine gen III manifolds, for supercharged they work well, I have a good used set with 4.5" tailpipes, transom rings and mufflers 2000.00, gg10

thanks that looks like a good deal. but it'll be a little while before i start to build

flatlander 05-30-2006 09:17 AM

Re: blower motor exhaust
 

Originally Posted by Ateco
Depending on the HP, we would recommend either Elbow Tops, Sport Tubes or Big Tubes. What CI and HP is the engine?

http://www.custommarine.com/headerap...erAppChart.php

We offerClamp on and Thru Hull styles and 4", 4-1/2" and 5" sizes of the CMI Sound Elimnation System Mufflers.

Let us know if we can help! Here's or current offering and thanks for the inquiry!!

http://www.offshoreonly.com/forums/s...d.php?t=131060

i was thinking about a 502 or 496 ho with a procharger and low boost but it's still a ways off.


All times are GMT -5. The time now is 04:25 AM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.