Offshoreonly.com - Alphas Question

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Alphas Question (https://www.offshoreonly.com/forums/general-q/132390-alphas-question.html)

dave911

06-10-2006 04:10 PM

Alphas Question

Lifted the drives to their max position (Alpha Gen 2 Counter Rotating), and the tie bar comes in contact with the slashcut tips. Looking for a fix to keep the drives from going to high up? Thanks

Vinny P

06-10-2006 08:07 PM

Re: Alphas Question

Do you have a trim limiter switch on the port side of the gimbal? If so, just adjust it down a bit.

dave911

06-11-2006 12:35 AM

Re: Alphas Question

Quote:

Originally Posted by checkmate454mag

Do you have a trim limiter switch on the port side of the gimbal? If so, just adjust it down a bit.

Is this trim limiter only for limiting trim while running? D

Vinny P

06-11-2006 06:17 AM

Re: Alphas Question

Yes, your trailer button will override it and allow the drive to go to full up position for trailering.

Pwrbt33

06-11-2006 10:04 AM

Re: Alphas Question

1 Attachment(s)

They make trim limit blocks for the inside of the trim ram to stop Bravos from triming all the way up, I have made these work in Alphas before to stop that problem.

John S. :D

The spacer is to theright of #13.

All times are GMT -5. The time now is 10:40 AM.