Having trouble finding a Bravo2 prop..
 

Anyone got a 16.5" & 23p aluminum???????.....Stainless I could use a 21p...

Re: Having trouble finding a Bravo2 prop..
 

There's someone on e-bay seling stainless bravo 2 props for around $429
Also try Hill Marine. Nice props..... BBB

Re: Having trouble finding a Bravo2 prop..
 

Well see that's the problem.....looking for a deal ya know. :D

Re: Having trouble finding a Bravo2 prop..
 

Shor, I have a bravo 2 alum prop down the shop , just redone in the winter by Long Island propeller . (not run since ) I'm not sure what pitch it is but I will check in the am. I believe its a 21 . Tom

Re: Having trouble finding a Bravo2 prop..
 

I THINK you are talking about Mark(LI prop) , He's a great Guy !!! He Knows his ISH ! BBB

Re: Having trouble finding a Bravo2 prop..
 

That would be great...I have a 16.5"x21p on her now and she is spinning 5600rpms...insane I know..I only did it twice.I either wanna go a stainless 21p or step to a 23p and see how she likes it.
26' Crownline cruiser(6500lbs) 5.7 merc.(250hp) B2 (2.2r)....she shows 46mph@5600rpm GPS..we have no idea how this is possible but I have no history on the motor.Looks stock but runs like a raped ape.I don't run her past 4500rpm's for any amount of time so I wann bring those numbers down a bit.

Re: Having trouble finding a Bravo2 prop..
 

Send the prop out to LI Propellor have it pitched to 23 if you have a 21. Theres a 21 Bravo 2 prop on ebay that needs a hub. Have the prop sent directly to the prop shop and kill 3 birds with one stone !
http://cgi.ebay.com/ebaymotors/Mercr...QQcmdZViewItem
This is from Jerry's marine service in Florida. Although being the largest distributer of marine engines and related parts on the East coast , he's very easygoing and personable to deal with. He might sell you the prop outright . BBB