Offshoreonly.com - trim tab question

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - trim tab question (https://www.offshoreonly.com/forums/general-q/136294-trim-tab-question.html)

edge_kw

07-27-2006 10:07 PM

trim tab question

'89 Formula. I don't have the manual for the trim tabs. I believe they're bennets. The fill tube is about 1/2" diameter and has about a 1" long dipstick incorporated into the cap. Anyone know where the fluid level should be in the reservoir? I'm guessing it should just be touching the bottom of the dipstick.
thanks,
Kevin

Ted G

07-27-2006 10:14 PM

Re: trim tab question

If there is no mark on the stick then put it about a 1/4" up the stick with the tabs completely retracted.

Mike Paula

07-28-2006 10:25 AM

Re: trim tab question

All of the bennets pumps I have seen have a level line on the white-ish resivor.
Mike

hunster

07-28-2006 12:19 PM

Re: trim tab question

Like mike said! My bennett res has a line on it too.

All times are GMT -5. The time now is 01:20 AM.