Labb Prop
I know it should be in another section but i think more people would see it here. I am running a 24 bravo1 labbed by hydromotive. before labbing the 24 the boat would not i call torque lean over to the one side when cruising and would not slip when coming on plane or porpose. After labbing it does all of these, actually it kind of runs like I have my mirage 23 on it but without the top-end and hole-shot. With the bravo 1 WOT is 5000rpm; 23mirage WOT is 5450rpm. So i try a mirage plus or another 4 blade?
|
Re: Labb Prop
Originally Posted by k24u
I know it should be in another section but i think more people would see it here. I am running a 24 bravo1 labbed by hydromotive. before labbing the 24 the boat would not i call torque lean over to the one side when cruising and would not slip when coming on plane or porpose. After labbing it does all of these, actually it kind of runs like I have my mirage 23 on it but without the top-end and hole-shot. With the bravo 1 WOT is 5000rpm; 23mirage WOT is 5450rpm. So i try a mirage plus or another 4 blade?
|
All times are GMT -5. The time now is 03:50 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.