Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Kurt from Konrad.... (https://www.offshoreonly.com/forums/general-q/137414-kurt-konrad.html)

Elite Marine 08-08-2006 07:33 PM

Kurt from Konrad....
 
I am interested in a Bravo replacement. Emailed you for info, specs, pricing etc...

Please send info to:

[email protected]

Application is a single engine 28', 6000# boat. Hoping to have 800+ HP next Spring. Interested in seeing your facility if possible.

Thank you,

Kirk

Lofty 08-08-2006 07:39 PM

Re: Kurt from Konrad....
 
We just did a Pantera 28' last year. Boat runs great with the Konrad!

RLW 08-08-2006 09:42 PM

Re: Kurt from Konrad....
 
I don't think they offer a shiftable drive. Transmission required.
Correct me if I am wrong.

Too Old 08-08-2006 09:54 PM

Re: Kurt from Konrad....
 
Kurt,

I assume you received the new trim cylinder?

Just wanted to remind you to send the old cylinder back to Trick so I can cover it under warranty.

Thanks,
Fred

Biggus 08-09-2006 04:23 AM

Re: Kurt from Konrad....
 
Kirk, Sorry you did not recieve my reply to your email. (sent it Monday morning) Feel free to call me anytime at 715-410-0735

Fred, Yes, I got the new cyl and installed it over the weekend. Spoke to James yesterday, it's on the way. Thank you very much! Great service!

Kurt
[email protected]

Elite Marine 08-09-2006 08:13 AM

Re: Kurt from Konrad....
 
I never received it, but got your PM today. Thank you very much.

How long until my ACE arrives? :D

MrCIG 08-09-2006 06:31 PM

Re: Kurt from Konrad....
 
1 Attachment(s)
You are going to love the Konrads.

With the trans you get nice easy shifting non of that clunking you get from the bravos.

Mark

Elite Marine 08-09-2006 07:06 PM

Re: Kurt from Konrad....
 
I appreciate the input MrCig.

Did you perform the install yourself? What did you have to do to the transom? Did you change the location of your engines?

Email me with some idea of the total cost please.

[email protected]

Thank you,

Kirk

LAKESIDE RESTORATIONS 08-10-2006 06:55 AM

Re: Kurt from Konrad....
 
3 Attachment(s)
Here is a set of 540hp's we installed.. They are a great drive!! We are a Konrad distributor and installer in Northeast Pa. Jamie / Lakeside :)

Griff 08-10-2006 01:28 PM

Re: Kurt from Konrad....
 

Originally Posted by RLW
I don't think they offer a shiftable drive. Transmission required.
Correct me if I am wrong.

They make one with a trans inside an extension box.

MrCIG 09-05-2006 10:10 PM

Re: Kurt from Konrad....
 

Originally Posted by Pantera28-650HP
I appreciate the input MrCig.

Did you perform the install yourself? What did you have to do to the transom? Did you change the location of your engines?

Email me with some idea of the total cost please.

[email protected]

Thank you,

Kirk

Sorry for the late response Kirk. I did the conversion myself with help of a couple friends. The motors stayed where they were and no glass work was needed, I had TRS's. I probably have about 80 Hours of running on them and no problems. My boat is real heavy and I run in Lake Michigan and have run in some big water for 80 Mile stints. And have run a couple of poker runs. I would recommend them to anyone.

Mark

Elite Marine 09-06-2006 07:06 PM

Re: Kurt from Konrad....
 
Thats what I wanted to hear. I plan on doing the Bravo - Ace Conversion this winter on my 28 Pantera, right after my 800+ HP engine is completed!

By the way, I am now a Konrad distributor and ready to take orders!!! :evilb:


All times are GMT -5. The time now is 06:40 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.