Offshoreonly.com - 500 Efi Whipple 2.3 Head ?

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - 500 Efi Whipple 2.3 Head ? (https://www.offshoreonly.com/forums/general-q/138645-500-efi-whipple-2-3-head.html)

chad1

08-22-2006 10:01 PM

500 Efi Whipple 2.3 Head ?

I Would Like To Pick Up Another 100 Hp. Turning The 2.3 Whipple 7psi I Move The Stock Head Gaskets.{i Knew It Was Coming} But I Did Pick Up 6 Mph!!!!
Looking At Brodix Bb2 Alum Heads.
Any One Tried This.

44MTI

08-23-2006 08:24 AM

Re: 500 Efi Whipple 2.3 Head ?

I would go for the bb3X CNC, A little more $, but a great flowing head. I have them on a set of 598's with Quad whipples.

chad1

08-23-2006 04:12 PM

Re: 500 Efi Whipple 2.3 Head ?

Will That Head Work The 2.3 Whipple Too Hard. I Want 100 More Hp Without A Camshaft Change

44MTI

08-23-2006 11:15 PM

Re: 500 Efi Whipple 2.3 Head ?

Should be less work for the whipple as this head flows better than the others.

All times are GMT -5. The time now is 04:12 AM.