Offshoreonly.com - Trim gauge help.

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Trim gauge help. (https://www.offshoreonly.com/forums/general-q/139126-trim-gauge-help.html)

kennyo

08-29-2006 09:10 AM

Trim gauge help.

My trim gauge pegs all the way up where you can't see it when the ign. is on. When you turn ign. off it sweeps down to the low end. All the wires appear to be hooked up. Any ideas?

Hydrolift

08-29-2006 05:42 PM

Re: Trim gauge help.

If your trim gauge goes all the way up, I think you either have a short (to ground) or its not hooked up right.

Did it work before, did you change anything?

David Stotz

08-30-2006 05:18 AM

Re: Trim gauge help.

Maybe the sending unit on the drive is bad ?

kennyo

08-30-2006 03:22 PM

Re: Trim gauge help.

Quote:

Originally Posted by Hydrolift

If your trim gauge goes all the way up, I think you either have a short (to ground) or its not hooked up right.

Did it work before, did you change anything?

I added some gauges. I think i do have a short. Thanks.

mr mercruiser

08-30-2006 09:10 PM

Re: Trim gauge help.

open circuit probably between outside transon plate and sender-assuming you wired the guages right

All times are GMT -5. The time now is 07:23 AM.