prop nut torque ??
Anyone know (off the top of their head), the proper torque for the prop nut on a bravo 1 drive.
Thanks. |
Re: prop nut torque ??
I think some merc. booklets call for 75, although some say the service manual calls for 55.
|
Re: prop nut torque ??
The service manual (#28) say 55lb-ft or 75Nm. for the propeller locknut, then align tabs with grooves.
|
Re: prop nut torque ??
Yep 55
|
Re: prop nut torque ??
2 clicks of the elbow
|
Re: prop nut torque ??
I'm gonna get lots of flack for this, but: Throw that damn tab washer away. So many folks don't get it seated properly and lose a prop or cause more problems by running sloppy. Buy a few new prop locknuts and use a new one every three times you remove the prop. Crank it VERY snug by feel. You will never lose a prop and it will be just as tight when you go to remove it the next time. --- Jer
|
All times are GMT -5. The time now is 04:17 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.