Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   OSO Tech Line Opinion (https://www.offshoreonly.com/forums/general-q/139339-oso-tech-line-opinion.html)

dean51267 08-31-2006 06:39 PM

OSO Tech Line Opinion
 
3 Attachment(s)
Were these motors over fueled? Here is the deal, seller says they were over fueled resulting in dilution of oil which resulted in starving of bearings, despite no oil smell and engines running strong.

I need OSO opinions to know how to proceed. I think he is full of it, but if I am wrong I need to suck it up and move on.

Thanks...

dean51267 08-31-2006 06:40 PM

Re: OSO Tech Line Opinion
 
3 Attachment(s)
more

dean51267 08-31-2006 06:42 PM

Re: OSO Tech Line Opinion
 
3 Attachment(s)
more2

SB 08-31-2006 07:11 PM

Re: OSO Tech Line Opinion
 
If they are truly GM crate motors do they (seller) have final word with warranty ? I doubt it. Tell them to call there rep have have them take a look. :D

BTW: I had two 502's come in that where so fuel diluted (MPI's that repair facility never did oil changes but wrote down they did :eek: ) that the lifters collapsed but no bearing issues. Never seen such a thing in my life but I've never done this sort of practice either.

My honest 02 - but take this as it is since not there to truly inspect things - there is another issue other than fuel.

Again, being a video screen driver. Nothing else.

dean51267 08-31-2006 08:34 PM

Re: OSO Tech Line Opinion
 

Originally Posted by Pwrbt33
Almost looks fat at idle and lean in the mid to upper range. Looks like there might be a heat issue but I cant see everything either. Just my opinion from what I see in these pictures.

Just my .02.

John S. :rolleyes:

when running there was no black smoke, I think the motors could have used more fuel, but they were not running lean....

Ted G 08-31-2006 10:26 PM

Re: OSO Tech Line Opinion
 
Nope, no black exhaust valves, no black plugs, no rich condition, next excuse from the seller please.......

Airpacker 09-01-2006 08:07 AM

Re: OSO Tech Line Opinion
 
Hows about the bearings on 5/6 con rods weren't clearanced enough for marine use and they locked and spun. I would demand to see all the other rod and main bearings before letting them away with that excuse. Every other bearing better be wiped clean of babbit too or call BS.

Dave_N 09-01-2006 08:43 AM

Re: OSO Tech Line Opinion
 
What were the results of the oil analysis?

Dave

dean51267 09-01-2006 09:06 AM

Re: OSO Tech Line Opinion
 
oil analysis is being done and is not yet received, still waiting for results :(

Wobble 09-01-2006 09:42 AM

Re: OSO Tech Line Opinion
 
If you paid for that motor by CC you should contact your CC company and dispute the charge. You will be amazed how "runsnew's" attitude will change when they are facing a chargeback and subsequent documentation of their so called warranty


All times are GMT -5. The time now is 02:14 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.