Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Another Oil Thread - 2 Cycle this time (https://www.offshoreonly.com/forums/general-q/140623-another-oil-thread-2-cycle-time.html)

mr_velocity 09-16-2006 09:16 AM

Another Oil Thread - 2 Cycle this time
 
So what's the best oil for 2 cycle? Klotz, Alisyn, Redline, Merc? The motor runs to 8000rpm. So what are you using?

Wobble 09-17-2006 09:07 AM

Re: Another Oil Thread - 2 Cycle this time
 
good question, i just bought a wave runner that is obviously injecting too much oil.

My buddy with a similar model is running synthetic oil premixed at 100-1 you can hardly tell it's 2 cycle.

4mulafastech 09-17-2006 10:26 AM

Re: Another Oil Thread - 2 Cycle this time
 

Originally Posted by mr_velocity
So what's the best oil for 2 cycle? Klotz, Alisyn, Redline, Merc? The motor runs to 8000rpm. So what are you using?

IMO Maxima Castor 927. I ran it in twin 2.5 liter carb HP Mercurys on nitrous oxide. Engines turned up to 9000 rpm on the juice. Ran a remote fuel cell with 100% alcohol and 927 as the enrichment fuel. Also mixed it 40 to 1 in the gas. This stuff is top of the line and keeps the combustion chambers and pistons very clean. It is expensive. Real popular with the high performance motorcycle crowd. One other plus is when the engines are running it smells just like those RC airplane engines that burn nitromethane. Everyone swore I was running nitromethane. Those that had no clue thought it was the nitrous... :rolleyes:


All times are GMT -5. The time now is 10:42 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.