![]() |
buying new drive, what ratio should i get?
i am buying a new drive and i dont what ratio my old one was. it has been painted so many times and i cant see any numbers on it. its a bravo one and its hooked to a 450hp 454 and it goes into a 1990 baja 226es.and with the old drive it was a steedy 70mph boat. i hope that helps, thanks
|
Re: buying new drive, what ratio should i get?
Its probably a 1.50 gear ratio. Doubt it would be a 1.36 what pitch prop are you running?
|
Re: buying new drive, what ratio should i get?
Bet it was a 1.5, Remove spark plugs and roll over by hand, count prop turns.
|
Re: buying new drive, what ratio should i get?
It should be a 1.50 ratio and even if its not, you should get a 1.50.
|
Re: buying new drive, what ratio should i get?
i was running a 23p rev 4 at 4800-4900rpms trimmed out.i cant spin the motor and count the rev. b/c i the reason i am replaceing the drive is i hit some rocks with the drive and cleaned it rite off the back of the boat :eek: . so now there is no drive on the boat just a broken transom ass. i am getting ready to order a new drive and transom so mybe if i am lucky i can sneek one ride in b4 winter. thanks for the info guys :drink:
|
Re: buying new drive, what ratio should i get?
1.5 Ratio I Would Stick With The Same
|
| All times are GMT -5. The time now is 06:56 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.