![]() |
How did oil get here?
1 Attachment(s)
Ran pretty hard yesterday, hitting 5,000 RPM for a 3 minute stretch.
Oil pressure good. Temp good. All sounds good, but when I went to clean up the engine compartment today, I noticed some oil pooling ON the intake manifold, in a couple different spots...and they don't seem to be near the breather hose? See pic. Thoughts? Thanks! D911 |
Re: How did oil get here?
either intake bolt or dripped down from where the breather connects to the flame arrestor.
|
Re: How did oil get here?
I'll look into intake bolt torque. Thnx
|
Re: How did oil get here?
I always put a little low grade locktite on the manifold bolts to stop oil coming out through them or water going the other way. Figure it cant hurt. Put a tap through them first mind. More likley dripped from the breather though.
|
Re: How did oil get here?
Don't turn a hair cut into brain surgery, it dripped from the breather hose.
|
| All times are GMT -5. The time now is 03:53 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.