Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   72 vevet drive (https://www.offshoreonly.com/forums/general-q/142952-72-vevet-drive.html)

nocigarette 10-17-2006 06:29 AM

72 vevet drive
 
how much hp will they take, because i think i am pushing it with 700 and i am thinking of adding a 1071 blower...

thedonz 10-17-2006 09:27 AM

Re: 72 vevet drive
 
you are pushing the limits if you plan on running the boat hard and will be in and out of the water....my 1000hp engines would fry the plates when racing and I even snapped a shaft.....again, that was racing; but if you are running it hard, plan on either upgrading or go crash box.....

good luck, your boat is awesome......my nephew, Mike, has a Sport which he is refurbishing as well

Frank

BROWNIE 10-17-2006 12:13 PM

Re: 72 vevet drive
 
Send it to Mark at BAM while it is still in one piece. He will make it bulletproof.

rdoactive 10-17-2006 12:34 PM

Re: 72 vevet drive
 
Hmmm, Velvet Drive is rated for about 500hp. Not going to last long with that power.

nocigarette 10-17-2006 04:06 PM

Re: 72 vevet drive
 

Originally Posted by BROWNIE
Send it to Mark at BAM while it is still in one piece. He will make it bulletproof.


i have been told that thanks brownie i will contact him this winter...........

nocigarette 10-17-2006 04:11 PM

Re: 72 vevet drive
 

Originally Posted by thedonz
you are pushing the limits if you plan on running the boat hard and will be in and out of the water....my 1000hp engines would fry the plates when racing and I even snapped a shaft.....again, that was racing; but if you are running it hard, plan on either upgrading or go crash box.....

good luck, your boat is awesome......my nephew, Mike, has a Sport which he is refurbishing as well

Frank


thanks donz sr. i plan on being in the heavy 900 hoarse range, i would not mind a crash box although with a single it is a ***** to dock now...........wait till you guys see the engine compartment after the winter i have the whole thing ripped down to the glass, going to diamond plate every flat surface and lots of cnc aluminum panels, dash, switch,throttle,vents etc...........my wife put the brakes on the funding so now i going to get my favors back from friends and make her real pretty................

Reed Jensen 10-17-2006 05:59 PM

Re: 72 vevet drive
 
Too much HP and Velvet drive become "Velveeta Drive"........ :evilb:

lucky strike 10-17-2006 07:37 PM

Re: 72 vevet drive
 

Originally Posted by Reed Jensen
Too much HP and Velvet drive become "Velveeta Drive"........ :evilb:

Thats funny......Sad but true.....


All times are GMT -5. The time now is 10:09 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.