Need a flywheel for a Mark IV 454 TRS
 

Wondering if anyone had a flywheel for a Mark IV 454 with a TRS. My flywheel and balnacer were stolen out of the back of my truck last yea. I am just now getting ready to send the crankshaft out for balancing and noticed I do not have it anymore.

Re: Need a flywheel for a Mark IV 454 TRS
 

I have some here but the shipping from Ca might kill you.

Re: Need a flywheel for a Mark IV 454 TRS
 

i have one but i'm not sure if it is from a mark IV. 1981 excalibur with a TRS drive.

Re: Need a flywheel for a Mark IV 454 TRS
 

excalibur81, what year is the motor?

Re: Need a flywheel for a Mark IV 454 TRS
 

It was the 330 horse 454. The engine did not come with the boat. I got all the parts but no block. It now has a 502. I'll see if I dig out the old flywheel and take a picture.

Re: Need a flywheel for a Mark IV 454 TRS
 

I have one on AuctionitonEbay for $60 - not sure if the add has run out yet. It is from my 1991 454 Mag. It is Externally Balanced, so if you are having your crank balanced (internally balanced) you will need to have it machined for zero balance. I live in Howell MI so shipping would not be bad. Send me an email if interested.
Thanks Steve

Re: Need a flywheel for a Mark IV 454 TRS
 

phughes69, I have a couple of pictures. the flywheel is 168 teeth on gear. set up for bellhousing mounted starter. PM me if you are interested. i'm in the south Chicago area.

Re: Need a flywheel for a Mark IV 454 TRS
 

I have at least a dozen of them, if you still need one send me a pm. the last few digits of the part # is 457N
That's the one you need..... BBB

Re: Need a flywheel for a Mark IV 454 TRS
 

excalibur81, I cant send you a pm. Your pm box is full