Hull blueprinting in Southern California
 

Who is good at Hull-blueprinting in the Southern Ca. area? I have a straight bottom 38 fever. I'm going to drop the boat off @ Paul Pfaff's in Huntington Beach to get some motor work done. Any good shops close to them? Thanks Poolshrk. :D

Re: Hull blueprinting in Southern California
 

I might be interested as well...

Re: Hull blueprinting in Southern California
 

How much is it to blueprint a hull and what kind of gains can you get from it?

Re: Hull blueprinting in Southern California
 

who does them in the S.E. Michigan area and a ball park price. Mine doesn't seem to have a hook.

Re: Hull blueprinting in Southern California
 

There is a palce in Tujunga called Joe's Tooling. He's about an hour from Pfaff. They do great work at real reasonable prices. I'm not sure if he will do it unless you strip it down to a bare hull so he can flip it over though.

Re: Hull blueprinting in Southern California
 

If you look up a shop buy the name of MPD (marine Performance Design) Jack McClure is the owner located in Costa Mesa (SP?) CA 1760 Monrovia St. Unit A-7 949-631-2040 . He works with a guy by the name of Jeff Bennett. The only what I know how to get hold of Jeff is though Jack. Now this shop works with Jet boats. Ok Ok dont get scared just yet. these are the big guns and Jeff know his stuff. He is responsible for a lot of bottom designs.