Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Konrad Ace Install Pictures? (https://www.offshoreonly.com/forums/general-q/146514-konrad-ace-install-pictures.html)

NJSONIC 12-08-2006 09:15 PM

Re: Konrad Ace Install Pictures?
 
Kirk,
I don't have clear photos of the extension box at this time. The box is 8". The boat is covered for the winter. The only things in the bilge would be the transmission.rear engine mount,and a gear oil bottle.

Biggus 12-11-2006 08:00 AM

Re: Konrad Ace Install Pictures?
 
3 Attachment(s)
Here's a few of the 34' DCB that Dorr's Marine in Windham Maine converted from Teague Platinum drives/Imco boxes to the Konrad Ace system.

Biggus 12-11-2006 08:06 AM

Re: Konrad Ace Install Pictures?
 
3 Attachment(s)
This was a pretty straightforward install. Since this was a driveline installation with the motors/transmissions mounted about 3 feet forward, we did not have to enlarge the existing transom cut-out.

Biggus 12-11-2006 08:11 AM

Re: Konrad Ace Install Pictures?
 
3 Attachment(s)
The boat runs real nice, no issues at all and has zero vibration. The owner logged about 50 hrs on it last season. It's powered by a pair of Teague 800's best speed so far was 126.0 gps

Biggus 12-11-2006 08:15 AM

Re: Konrad Ace Install Pictures?
 
2 Attachment(s)
A very happy owner! :D


All times are GMT -5. The time now is 03:14 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.