![]() |
Volvo Penta 496 or not??????
I've always dealt w/Merc., but I found this engine. I have a 05' baja that I would like to get more out speed out of. I found this engine, and here is a description. My boat is set up w/Merc. right now. I'm wondering if it can be adapted as stated below, and the pros/cons of going w/the volvo instead of a merc? The used volvo is considerably cheaper than a used Merc. too.
Advertisement description: 2001 8.1 496/420 hp Volvo Penta. One complete Volvo Penta 8.1 "Pilot" engine with 180 hours ( 100 hours were at less than 1000 RPM) To adapt to a Merc you just need to change the bell housing, coupler & mounts and it will connect to a 10 pin Merc plug. good condition! Ready to go Thanks for any help/info. given. |
Re: Volvo Penta 496 or not??????
It will adapt as stated in the ad. The volvo 496 is built on a GM platform just like Merc. so alot of the same parts apply. There really is no downside. I have Volvo 600s in my boat. No issues.
|
Re: Volvo Penta 496 or not??????
I bought a VP from the same source and installed in my boat coupled to a Merc Bravo one drive.
Shawn is a straight shooter and is a vary knowledgeable and helpful mechanic. You will not be disappointed...:cool: |
Re: Volvo Penta 496 or not??????
I did the swap from a merc 454 to a Volvo 496. Very happy and the impeller is 10 min change. Also the Volvo uses the MEFI4 ecm which is easily reprogramed. I have done some of the Raylar upgrades with the money I have saved from going with the Volvo.
|
Re: Volvo Penta 496 or not??????
I appreciate everyone's input. Muffman, I noticed the water pump impeller loc. also. Def. easier to change. It reminds me of a Merc. inboard setup. I'm def. leaning harder towards making something happen. It doesn't appear to have a closed cooling system. I wonder if it's as easy to drain the water out of it as w/the Merc., and if the elec. fuel pump is mounted on the engine or requires an inline or in tank pump? I already have a bravo coupling, bellhousing, the engine mounts, and adj. platform mounts. I take it that's all I need and my plug in the boat will plug up directly to the engine? I like the sound of it if that's the case.....sounds like a relatively easy task! :D
|
Re: Volvo Penta 496 or not??????
Originally Posted by Pat McPherson
(Post 1987425)
I bought a VP from the same source and installed in my boat coupled to a Merc Bravo one drive.
Shawn is a straight shooter and is a vary knowledgeable and helpful mechanic. You will not be disappointed...:cool: I can put you in touch with my source if you'd like. Yes, I too like the VP accessory layout better than Merc's. |
Re: Volvo Penta 496 or not??????
Originally Posted by 86RedRocket
(Post 1987488)
It doesn't appear to have a closed cooling system. I wonder if it's as easy to drain the water out of it as w/the Merc., and if the elec. fuel pump is mounted on the engine or requires an inline or in tank pump? I already have a bravo coupling, bellhousing, the engine mounts, and adj. platform mounts. I take it that's all I need and my plug in the boat will plug up directly to the engine? I like the sound of it if that's the case.....sounds like a relatively easy task! :D
Most VPs do not come with closed cooling unless it is set up for an inboard. If you are using the Merc adjustable mounts, they bolt right up. If you have an "off-shore/race" engine mount, there may be a problem clearing the oil pan. Good Luck |
Re: Volvo Penta 496 or not??????
Originally Posted by Pat McPherson
(Post 1987495)
I just had a correspondence with Shawn. These are not from him. Not that there is anything wrong with them, but...
I can put you in touch with my source if you'd like. Yes, I too like the VP accessory layout better than Merc's. |
Re: Volvo Penta 496 or not??????
Originally Posted by 86RedRocket
(Post 1991162)
I am interested in talking to your source. I'd like to compare prices. Also you've dealt w/him before and approve.
I'll e-mail you his address if you will give me yours. |
Re: Volvo Penta 496 or not??????
Originally Posted by Pat McPherson
(Post 1991649)
Yes, I bought an engine and other parts from Shawn. I also have a good friend that bought an engine from him. I have put a number of OSO members in touch with Shawn; all good feedback...:cool:
I'll e-mail you his address if you will give me yours. Thank you. |
| All times are GMT -5. The time now is 07:44 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.