Offshoreonly.com
Page 3 of 3
1
2
3
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Chad Hill - SS Upper Shaft(Bravo) (https://www.offshoreonly.com/forums/general-q/149135-chad-hill-ss-upper-shaft-bravo.html)

articfriends 05-26-2012 08:12 PM
Originally Posted by Vinny P (Post 3696248)
I have used Imcos ring, helmet, pins, etc.. they all fit together perfectly right out of the box. No need to screw around machining anything.
Does Imco make a HD gimbal that doesn't need mechanical trim indicators so the regular electric ones and the screw in pins can be used? I don't remember if this was ever addressed but was the reason I wasted my money on the Hill one that wouldn't work (for other reasons-fitment), thanks, Smitty

Vinny P 05-26-2012 08:16 PM
Smitty,
To the best of my knowledge, no they dont. I dont recall ever seeing an Imco ring that will accept electric trim senders.

MikeScarab28XLT 05-27-2012 04:53 AM
I broke ma Gimbel Ring conection to the hydraulik rams.
So i need a new Gimbel Ring.

I have see the stainless Steel gimbel rings in ebay and webside Hill.

I have google and found the old postings from 2006.

But i found nothing wrong postings from 2010, 2011,....


All times are GMT -5. The time now is 05:16 AM.
Page 3 of 3
1
2
3
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.