Offshoreonly.com - Remote oil cooler install....

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Remote oil cooler install.... (https://www.offshoreonly.com/forums/general-q/149163-remote-oil-cooler-install.html)

kennyo

01-16-2007 08:57 AM

Re: Remote oil cooler install....

Quote:

Originally Posted by checkmate454mag (Post 1993735)

Hello Bo,
You know what they say, a picture is worth a thousand words..

Maybe this will help also..

Don't they normally go from the block to the filter to the oil cooler Back to the block?

Vinny P

01-16-2007 05:26 PM

Re: Remote oil cooler install....

Quote:

Originally Posted by kennyo (Post 1994994)

Don't they normally go from the block to the filter to the oil cooler Back to the block?

I dont remember where I got that diagram from, maybe Hardin Marine, not sure. In any case, my system is from Hardin. Their tech support recommended I plumb it this way. They say they want the filter after the cooler, just in case their is some debris that gathered in the cooler. That way, if it comes loose, it will get caught before going back into the engine.

29scarab

01-17-2007 07:58 AM

Re: Remote oil cooler install....

NOW,,,if it would just F**IN' warm up enough for me to install it!!!

36 For a high in Houston!! WTF!!!

RLW	01-17-2007 10:21 AM

Re: Remote oil cooler install....

Vinnie and others,
Diagram came from this thread. Worth reading again.
http://www.offshoreonly.com/forums/s...d.php?t=114592

Vinny P

01-17-2007 06:42 PM

Re: Remote oil cooler install....

Hey Russ,

Yeah, I guess that is where I got the diagram from. :D

Stay warm up there, it finally got cold here, I could imagine what its like up there!:(

All times are GMT -5. The time now is 02:58 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page