Offshoreonly.com - Verifying Fuel Preasure at the rail, needle bouncing all over the place!

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Verifying Fuel Preasure at the rail, needle bouncing all over the place! (https://www.offshoreonly.com/forums/general-q/149847-verifying-fuel-preasure-rail-needle-bouncing-all-over-place.html)

Donzi502

01-26-2007 04:35 AM

Re: Verifying Fuel Preasure at the rail, needle bouncing all over the place!

I have a meter of rubber hose to my gauage. It just wraps around the top of the engine and a gauge is cable tied to the heat exchanger hose. Needle is solid and steady. With 4 inches of hose the needle was up and down like a hores draws. Jas

All times are GMT -5. The time now is 05:10 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page