Verifying Fuel Preasure at the rail, needle bouncing all over the place!
01-26-2007, 04:35 AM
#11
Registered
Join Date: Sep 2006
Location: Auckland
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
Re: Verifying Fuel Preasure at the rail, needle bouncing all over the place!
I have a meter of rubber hose to my gauage. It just wraps around the top of the engine and a gauge is cable tied to the heat exchanger hose. Needle is solid and steady. With 4 inches of hose the needle was up and down like a hores draws. Jas
