Need a set of good cores
 

454 Mag Heads - casting number 14096188

Anyone have a good set?? Maybe two sets?

PM me with location and $$.

Thanks

Capt Ross

JasonSmith has 2 sets listed in the swap shop with a link to an ebay auction.

http://www.offshoreonly.com/classifi...ate=1169170045

Ross,

I have had good luck getting cores from Little Bill at Victory marine. Most all of his used stuff has been replaced under factory warranty. I think he buys a lot of it in job lots from mercruiser or their dealers.

With heads plan on crack test, new valves, seats and guides.

We got one bad head and he swapped it out no problem. Some of this stuff looks to be almost brand new, but as stated before it is take offs for warranty so be aware.

I have 2 pair -cleaned, valves ground,surfaced,magnafluxed,proffesionaly ported,hard exhaust seats,pressure checked, includes s.s.valves,long rocker studs,guide plates,springs retainers keepers, and seals ready to assembe,or will assemble- fresh water ready to go, nothing further needed! ohio- will ship- will send pics if your interested....Ken [email protected]

Ive got 2 sets also. 1 is still on the motor, and the other has been magnafluxed with no cracks. 500.00 per set.